1. Installation of single hole basin faucet
When buying a single-handle basin faucet, you should pay attention to the diameter of the drain outlet. At present, most of the market has a hard pipe for water intake. Pay attention to the reserved water pipe height. It is best to go down from the basin to about 30. During installation, a special angle valve must be selected, and the angle valve must be fixed to the hot and cold water pipes from the wall. If there is a distance between the angle valve and the water pipe on the faucet, you need to purchase a special pipe to extend the link. Do not use other water pipes to connect, otherwise it will leak or fall off due to high water pressure. If the inlet pipe is too long to exceed the outlet pipe, just cut off the excess.

2. Installation of thermostatic faucet
Before installing the thermostatic faucet, first check which side of the water pipe is cold water and which side is hot water, especially if the cold and hot water pipes are connected incorrectly, so as not to affect the future work of the faucet. Gas and solar water heaters cannot use thermostatic faucets, mainly because the water pressure is too low. The installation of thermostatic faucet also requires the installation of hot and cold water filters.

3. Installation of shower and bathtub faucets
If you buy a shower, bathtub, or wall-mounted faucet, you need to choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes is about 20 or more. Flush the water pipe before installation to avoid damaging the faucet due to hard water. Concealed shower and bathtub faucets: After purchasing a concealed faucet, the valve core of the faucet is generally pre-buried in the wall. Before embedding, consider the thickness of the bathroom wall. If the wall is too thin, the spool will not be embedded. Do not remove the plastic protective cover of the valve core easily during pre-embedding, so as to avoid damage to the valve core by cement and other chores during pre-embedding. In addition, you should pay attention to the up and down, left and right directions of the spool when embedding the spool, so as not to embed the spool incorrectly.

4. Installation of single-hole kitchen faucet
Because the kitchen faucet is used frequently, and it is easy to loosen when moving around, all requirements for stability are taken for granted, so the lock nut must be tightened. At present, there are a number of screw pipes whose leading heads are enlarged nuts in the building materials market, which have super stable effect. Obvious effects will become the trend of the generation.

With nearly 20 years’ development, Zhejiang Unoo Sanitary Tech Co., Ltd. has become one of the high-end and professional Shower Mixers Manufacturers and Bathroom Faucet Suppliers in China , the company covers a production base of nearly 20,000 square meters, and has more than 400 employees. Unoo has complete modern production lines, from the purchasing of raw materials, scientific planning of production processes, to casting, CNC machining, drilling, polishing, welding, assembling and other workshops, With the refined products operations and strict quality inspection process, to reach an annual output of 5 million sets products. Owned with gravity casting and advanced sand casting equipment,Unoo produces various wholesale shower faucets shells, and various CNC machining equipment to ensure each custom Bidet Mixers is accurate and standard.