Maintenance and cleaning of bath and shower faucets- Zhejiang Unoo Sanitary Tech Co., Ltd.

Maintenance and cleaning of bath and shower faucets

1. The surface of the faucet should be gently wiped with a soft cloth (without impurities) dipped in detergent. Avoid using wire balls or scouring pads with hard particles. In addition, do not hit with hard objects so as to bruise the surface of the faucet.

2. Use the following cleaners to remove rough masks and buildup: mild liquid glass cleaner, pure liquid glass cleaner, acid-free, non-abrasive soft liquid or powder that dissolves completely, non-abrasive solution polish.

3. Never use any abrasive cleaners, cloths or paper cloths; never use any acid-containing cleaners, polishing abrasives or rough cleaners.

4. Under the condition that the water pressure is not lower than 0.02mpa (ie 0.2kgf/cm2), after a period of use, if it is found that the water output decreases, or even the water heater is turned off, it can be lighted at the water outlet of the faucet. Gently unscrew the screen cover, remove impurities, and generally return to normal.

Maintenance of bathtub shower faucet

1. Before installing the faucet, it is necessary to rinse with water, wash the sediment and impurities in the water pipe, go out the debris in the installation hole, and check that the accessories in the packaging box are not mixed with impurities, and the ceramic valve core is bet on the game or worn.

2. Use a soft cloth to apply toothpaste to clean the surface, then clean the surface with water. Do not use alkaline cleaners or wipe with scouring pads or steel balls to avoid damage to the electroplating surface.

3. The single handle faucet should be slowly opened and closed during use; the double handle faucet should not be closed too tightly, otherwise the water stopper will fall off, causing the problem that it cannot be closed and the water cannot be stopped.